FTWM-01L Wall Mount Enclosure
Sumitomo Electric Lightwave’s FTWM-01L Wall Mount Enclosure is a sturdy indoor interconnect and splice-housing unit, capable of holding a single FOX Splice Cassette, LGX Cassette, or interconnect panel with a splice chip for up to 24 LC-Duplex or 12 SC connections, or act as a simple splice protection box. In addition, due to its compact size and low profile, this enclosure can be used in a variety of indoor applications and applications and can even be used in conjunction with two housings to form a single, higher-capacity unit.
Specification
| PROPERTY | SPECIFICATION |
|---|---|
| Product Type | Wall Mount Unit |
| Environmental Space | Indoor |
| Fiber Capacity | 48 Fibers |
| Splice Tray Capacity | N/A |
| Port Capacity | 24 LC (12 SC) |
| Module Capacity | 1 LGX Cassette/Adapter Module |
| Module Compatibility | LGX |
| Growth Configuration | Unloaded |
| Mounting Type | Wall Mount; DIN Rail Mount |
| Lock Type | Padlock Eyelet |
| Removable Front Door | Yes |
| Cable Entry/Exit Access Area | 1, Left; 1, Right Access Areas |
| Cable Management Access | Top Access |
Physical Characteristics
| PROPERTY | SPECIFICATION |
|---|---|
| Height | 6.1 in (155 mm) |
| Width | 9.9 in (251 mm) |
| Depth | 1.6 in (41 mm) |
| Weight | 1.2 lb (0.54 kg) |
| Color | Black |
| Material | Aluminum: Powder Coated |
Kitting Components
| COMPONENTS | DESCRIPTION | QUANTITY |
|---|---|---|
| Cable Tie Mount | Used in Back for Cable Management | 4 |
| Tie Wraps | Used To Attach Cables Down in the Back, 5.75 in x 0.14 in (146 mm x 4 mm) | 4 |
| Hook & Loop Tie Wrap | 15 in (382 mm) Hook & Loop Tie Wrap | 1 |
| Push Pull Tabs | Used To Stack Two Enclosures Together | 1 |
| Din Rail Mounting Clip | Din Rail Mounting Clip | 2 |
| Alcohol Pad | Used To Clean Surface Area for Splice Chip | 1 |
| Screw, DIN Rail Adapters | Screws for the Din Rail Mounting Clip to Enclosure | 4 |
Ordering Information
| PART NUMBER | CASSETTE/PANEL CAP. | PORT CAP. | FIBER CAP. | SPLICE TRAY CAP. | HOLE TYPE | DIMENSIONS (W. x H. x D.) |
|---|---|---|---|---|---|---|
| FTWM-01L | 1 | 24 LC (12 SC) | 24f | N/A | Knockout | 9.9 x 6.1 x 2.2 in (251 x 155 x 56 mm) |
Accessories
Interconnect Panels/Bulkheads
Instructions: Create a part number by using this character set and codes.
FT [ 1 1 ] P [ 2 2 ] [ 3 ]
| [ 1 ] – Face Connector Type | [ 2 ] – Adapter Type/Port Quantity | [ 3 ] – Fiber Type |
|---|---|---|
| LC – LC Connector SC – SC Connector FC – FC Connector ST – ST Connector | 6Q – 6 Quad/24 Ports (LC Only) 6D – 6 Duplex/12 Ports 3D – 3 Duplex/6 Ports 6S – 6 Simplex/6 Ports (SC Only) | A – SM APC, Green B – SM, Blue 6 – OM5, Lime Green 7 – OM3/4, Aqua 8 – OM2, Black 9 – OM1/2, Beige |
PrecisionFlex® LGX MPO Cassettes
Instructions: Create a part number by using this character set and codes.
FT [ 1 1 ] – MP [ 2 2 ] [ 3 ] C [ 4 4 4 ] – L [ 5 ] [ 6 ] [ 7 ] – [ 8 ]
| [ 1 ] – Front Connector Type | [ 2 ] – Front Connector Count | [ 3 ] – Front Connector Polish Type | [ 4 ] – Fiber Type |
|---|---|---|---|
| LC – LC Connector (Max. 24 Ports) SC – SC Connector (Max. 12 Ports) FC – FC Connector (Max. 12 Ports) ST – ST Connector (Max. 12 Ports) | 08 – 8 Connector Ports 12 – 12 Connector Ports 24 – 24 Connector Ports | U – UPC A – APC | OM1 – OM1 OM4 – OM4 (Compatible with OM2/OM3) OS1 – OS1 OS2 – OS2 |
| [ 5 ] – Rear MPO Connector Count | [ 6 ] – MPO Gender | [ 7 ] – MPO Configuration Method | [ 8 ] – Other |
|---|---|---|---|
| 1 – 1 MPO 2 – 2 MPOs 3 – 3 MPOs | M – Male/Pinned F – Female/Unpinned | A – Method A B – Method B C – Method C | (leave blank) – Not Applicable UNIV – Universal Mount GRN – Green Adapter RED – Red Adapter YEL – Yellow Adapter |
PrecisionFlex® FOX Splice Cassettes
Instructions: Create a part number by using this character set and codes.
FT [ 1 1 ] – F [ 2 2 ] [ 3 3 ] [ 4 4 4 ] [ 5 5 5 ] [ 6 6 6 6 ]
| [ 1 ] – Front Connector Type | [ 2 ] – Housing Color | [ 3 ] – Fiber Count |
|---|---|---|
| LC – LC Connector SC – SC Connector ST – ST Connector | BK – Black | 06 – 6 Fiber 12 – 12 Fiber 24 – 24-Fiber (LC Only) |
| [ 4 ] – Fiber Construction | [ 5 ] – Fiber Type | [ 6 ] – Special |
|---|---|---|
| RBN – Ribbon TBF – Tight Buffer | OM1 – OM1 OM4 – OM4 (Compatible with OM2/OM3) OM5 – OM5 OS2 – OS2 | (leave blank) – Not Applicable APFC – APC (Angle-Polished Connector) |
Accessories
| PART NUMBER | CASSETTE/PANEL CAP. |
|---|---|
| FPS-1 | Single-Fiber Protection Sleeves, Stainless Steel Strength Member, 2.36 in (60 mm); 50 per pack |
| FPS-40 | Single-Fiber Protection Sleeves, Stainless Steel Strength Member, 1.57 in (40 mm); 50 per pack |
| FPS-6 | Mass-Fiber Protection Sleeves, Glass Ceramic Strength Member, 1.57 in (40 mm); 25 per pack |
| FPS-61-2.6 | Pre-Shrunk Single-Fiber Protection Sleeves, Stainless Steel Strength Member, 2.40 in (61 mm); 100 per pack |
Features
Durable & Compact Enclosure
- 24 Fiber Capacity (24 LC Adapters)
- Protective Aluminum Frame
- Provides Low Profile
- Two Cable Entry Ports
One LGX Compatible Space
- Compatible with the following:
- FOX Splice Cassettes
- LGX Cassettes
- Interconnect Panels/Bulkheads
Door
- Padlock eyelets provides further security (padlock not supplied)
- Push/pull tabs for easier opening
Multiple Mounting Options
- Wall-Mountable
- DIN Rail Mountable
Stackable
- Allows for more fiber in a single location
- Up to two enclosures to be stacked
Related products
-
FutureFLEX® Air-Blown Fiber® Solutions
OM3/OM4 Multi-Mode 50μm Fiber Bundles
View Product -
FutureFLEX® Air-Blown Fiber® Solutions
Outdoor Normal Environment Tube Cables (Duct and Direct Buried)
View Product -
FutureFLEX® Air-Blown Fiber® Solutions
Indoor NEMA 1-Rated Tube Distribution Units
View Product -
FutureFLEX® Air-Blown Fiber® Solutions
Dust-Tight Strain Relief Kellems Grips
View Product