OS2 Single-Mode Fiber Bundles
Sumitomo Electric Lightwave’s OS2 Single-Mode Fiber Bundles are designed for installation into the FutureFLEX® Air-Blown Fiber® tube cable infrastructure. They can be used in indoor and outdoor applications.
Product Downloads
Specifications
| Property | Specification |
|---|---|
| Fiber Bundle Jacket Material | Polyethylene Extruded Foam (PEF) |
| Fiber Bundle Jacket Color | Yellow |
| Core Diameter | 8.3μm |
| Core / Cladding Offset | ≤ 0.4μm |
| Cladding Diameter | 125μm |
| Maximum Attenuation | 1310 nm | ≤ 0.40 dB/km 1550 nm | ≤ 0.30 dB/km |
| Index of Refraction | 1310 nm | 1.466 1550 nm | 1.467 1625 nm | 1.47 |
| Fiber Bundle Minimum Bend Radius | 1.5 in (38.1 mm) |
Ordering Information
| Part Number | Fiber Type | Description | Outside Diameter | Max Weight | Max Length (600 Bobbin) | |
|---|---|---|---|---|---|---|
| IN | MM | LBS/KFT | FT | |||
| FB06SX | SM OS2 | Single-Mode 6-Fiber | 0.08 | 2.0 | 1.3 | 40,000 |
| FB12SXS | SM OS2 | Single-Mode 12-Fiber | 0.08 | 2.1 | 1.9 | 37,500 |
| FB24SX | SM OS2 | Single-Mode 24-Fiber | 0.12 | 3.0 | 3.4 | 15,700 |
| FB48SX | SM OS2 | Single-Mode 48-Fiber | 0.15 | 3.7 | 5.6 | 10,900 |
Resources
| Sumitomo Recommended Procedures |
|---|
| SP-F04-002: ABF Fiber Bundle Specification Sheet |
| SP-F04-006: Fiber Bundle Stripping Procedure |
| SP-F04-025: Fiber Bundle Removal Procedure |
| LFI Resource Portal |
|---|
| LFI Resource Portal | Sumitomo Electric Lightwave Corporation |
How-To Videos
See All Videos
Splicing and Assembling MPO Connector on Sumitomo Electric’s Q102-M12 Ribbon Fiber Fusion Splicer
Assembling an ST Splice-On Connector with Sumitomo Electric’s Q102-CA+ Fusion Splicer on Cordage
Part of Sumitomo Electric Lightwave’s How -To video series. This guide provides a thorough introduction to Assembling an ST Splice-On Connector with Sumitomo Electric’s Q102-CA+ Fusion Splicer on Cordage
Splicing Ribbon Fiber on Sumitomo Electric’s Q102-M12 Ribbon Fiber Fusion Splicer
Splicing Fiber with Sumitomo Electric’s Q102-CA+ Fusion Splicer
Part of Sumitomo Electric Lightwave’s How -To video series. This guide provides a thorough introduction to Splicing with Sumitomo Electric’s Q102-CA+ Fusion Splicer
Features
- Up to 48 Fibers per Bundle
- Industry Standard Low Water Peak Single-Mode Optical Fiber
- Fibers Individually Color-Coded per TIA Standards
- Yellow Aerodynamic Jacket Allows Long Distance Blows
- Ripcords for Easy Bundle Entry
- UL-Listed for use with Fire-Rated Tube Cables
- Meets ICEA, TIA, and UL Standards
