Indoor Wall Mounted Tube Distribution Unit

Indoor Wall Mounted Tube Distribution Unit
Indoor Wall Mounted Tube Distribution Unit

Featuring a scalable and flexible design, Sumitomo Electric Lightwave’s Indoor Wall Mount Tube Distribution Unit is an enclosure used at tube cable transition or branching points. Tube cables are installed through the knockout holes and the tubes are joined together using push-fit connectors within the enclosure. This results in the creation of pathways between distribution or termination points.  In addition, an optional space-saving tandem replacement door can be used to attach a wall-mounted fiber termination unit for direct termination.

Find a Distributor

Product Downloads

Product Information

Download

Recommended Procedure

Download

Physical Characteristics

PROPERTYSPECIFICATION
Height16 in (407 mm)
Width16 in (407 mm)
Depth4 in (102 mm)
Weight5 lb (2.27 kg)

Kitting Components

COMPONENTSQUANTITY
Hose Clamp6
Bushing6
Grommet Edging1
Keys2
Tube Clip Organizer4

Ordering Information

PART NUMBERMATERIALTUBE CAP. (Approx.)WEIGHTDIMENSIONS
DE06MDUAluminum42 Tubes5 lb (2.3 kg)16 x 16 x 4 in (407 x 407 x102 mm)

Accessories

PART NUMBERDESCRIPTION
BETC001Tube Cutter
DE06KEYReplacement Lock Set with Two Keys for DE06MDU
DE06MPTube Plug (6 mm) for Use in All Tubes Except Plenum; Orange; 1 ea.
DE08MC2Straight Tube Coupling (8 mm) for Non-Hazardous Areas; Clear/Red; 1 ea.
DETC008Black Plastic Tube Clip Organizer Comes with 10 Organizers and 40 Screws; Each Organizer Can Hold up to 8 Tubes and 4 Screws
FTWM-08LWall-Mounted Enclosure (192f or 192 LC capacity); 13 x 14.5 x 5.9 in (330 x 369 x 150 mm)
FTWM-TANDEM-DOORReplacement Door for DE06MDU for Tandem Mounting of FTWM-08L

Resources

Sumitomo Recommended Procedure
SP-F04-008: Tube Cable Installation Procedures
SP-F04-030: Grounding & Bonding Metallic Tube Cables
LFI Resource Portal
LFI Resource Portal | Sumitomo Electric Lightwave Corporation

Features

Features

  • Protective aluminum frame
  • Key lockable
  • Tie-down slots
  • Four pre-installed multitude holders
  • Twelve knockout holes (4 per horizontal and 2 per vertical side)
  • Removable door
  • Optional replacement door for tandem mounting of FTWM-08L wall mount enclosure

Benefits

  • Provides Low Profile for Multiple Indoor Locations
  • Secure and Protected
  • Allows for Tube Management
  • Convenient and Easy Access Inside
  • Tandem Door Allows for Direct Transfer of Fiber from Tube Distribution to Termination Unit
  • Modular Design

Related products