FTWM-04L Wall Mount Enclosure

FTWM-04L Wall Mount Enclosure
FTWM-04L Wall Mount Enclosure
FTWM-04L Wall Mount Enclosure
FTWM-04L Wall Mount Enclosure

Sumitomo Electric Lightwave’s FTWM-04L Wall Mount Enclosure is an easy-to-install, indoor, wall-mountable metal cabinet solution capable of handling a wide range of cable constructions including ribbon, loose-buffer, tight-buffer, or FutureFlex® Air-Blown Fiber® bundles. Designed to hold up to 96 LC-Duplex adapters via 4 PrecisionFlex® FOX Splice Cassettes or LGX interconnect panels along with ribbon or single-fiber splices, this enclosure is a good solution to house the transition of outside-plant cables to indoor-distribution cables. In addition, its low profile allows for convenient placement in a variety of locations.

Find a Distributor

Product Downloads

Product Information

Download

Recommended Procedure

Download

Physical Characteristics

PROPERTYSPECIFICATION
Height13.2 in (336 mm)
Width11.2 in (285 mm)
Depth3.5 in (89 mm)
Weight3.1 lb (1.41 kg) [empty]

Kitting Components

COMPONENTSDESCRIPTIONQUANTITY
Cable Tie MountUsed in Back for Cable Management4
Tie WrapsUsed To Attach Cables Down in the Back, 5.75 in x 0.14 in (146 mm x 4 mm)4
Hook & Loop Tie Wrap15 in (382 mm) Hook & Loop Tie Wrap1
Alcohol PadUsed To Clean Surface Area for Splice Chip1
GrommetSnap-in Sealing/Cable Entry Grommet, 1 in. Diameter4

Ordering Information

PART NUMBERCASSETTE/PANEL CAP.PORT
CAP.		FIBER
CAP.		SPLICE TRAY
CAP.		HOLE TYPEDIMENSIONS
(W x H x D)
FTWM-04L496 LC144f4 TraysKnockout11.2 x 13.2 x 3.5 in
(285 x 336 x 89 mm)
Kitting components with every unit.

Accessories

Interconnect Panels/Bulkheads

Instructions: Create a part number by using this character set and codes.

FT [ 1 1 ] P [ 2 2 ] [ 3 ]

[ 1 ] – Face Connector Type[ 2 ] – Adapter Type/Port Quantity[ 3 ] – Fiber Type
LC – LC Connector
SC – SC Connector
FC – FC Connector
ST – ST Connector		6Q – 6 Quad/24 Ports (LC Only)
6D – 6 Duplex/12 Ports
3D – 3 Duplex/6 Ports
6S – 6 Simplex/6 Ports (SC Only)		A – SM APC, Green
B – SM, Blue
6 – OM5, Lime Green
7 – OM3/4, Aqua
8 – OM2, Black
9 – OM1/2, Beige

PrecisionFlex® LGX MPO Cassettes

Instructions: Create a part number by using this character set and codes.

FT [ 1 1 ] – MP [ 2 2 ] [ 3 ] C [ 4 4 4 ] – L [ 5 ] [ 6 ] [ 7 ] – [ 8 ]

[ 1 ] – Front Connector Type[ 2 ] – Front Connector Count[ 3 ] – Front Connector Polish Type[ 4 ] – Fiber Type
LC – LC Connector (Max. 24 Ports)
SC – SC Connector (Max. 12 Ports)
FC – FC Connector (Max. 12 Ports)
ST – ST Connector (Max. 12 Ports)		08 – 8 Connector Ports
12 – 12 Connector Ports
24 – 24 Connector Ports		U – UPC
A – APC		OM1 – OM1
OM4 – OM4 (Compatible with OM2/OM3)
OS1 – OS1
OS2 – OS2
[ 5 ] – Rear MPO Connector Count[ 6 ] – MPO Gender[ 7 ] – MPO Configuration Method[ 8 ] – Other
1 – 1 MPO
2 – 2 MPOs
3 – 3 MPOs		M – Male/Pinned
F – Female/Unpinned		A – Method A
B – Method B
C – Method C		(leave blank) – Not Applicable
UNIV – Universal Mount
GRN – Green Adapter
RED – Red Adapter
YEL – Yellow Adapter

PrecisionFlex® FOX Splice Cassettes

Instructions: Create a part number by using this character set and codes.

FT [ 1 1 ] – F [ 2 2 ] [ 3 3 ] [ 4 4 4 ] [ 5 5 5 ] [ 6 6 6 6 ]

[ 1 ] – Front Connector Type[ 2 ] – Housing Color[ 3 ] – Fiber Count
LC – LC Connector
SC – SC Connector
ST – ST Connector		BK – Black06 – 6 Fiber
12 – 12 Fiber
24 – 24-Fiber (LC Only)
[ 4 ] – Fiber Construction[ 5 ] – Fiber Type[ 6 ] – Special
RBN – Ribbon
TBF – Tight Buffer		OM1 – OM1
OM4 – OM4 (Compatible with OM2/OM3)
OM5 – OM5
OS2 – OS2		(leave blank) – Not Applicable
APFC – APC (Angle-Polished Connector)
Kitting components with every unit comprised of fiber protection sleeves, splice sleeve holders, cable grommet, and more. (White housing color option available upon request.)

Accessories

Part NumberDescription
FT-PFST-B-RPrecisionFlex® Splice Tray with 144f (12 x 12ct) Capacity
FTWM-04L-SPLICETRAY-BRACKETFTWM-04L Splice Tray Holder; Compatible with FTWM-04L
FPS-1 Single-Fiber Protection Sleeves, Stainless Steel Strength Member, 2.36 in (60 mm); 50 per pack
FPS-40Single-Fiber Protection Sleeves, Stainless Steel Strength Member, 1.57 in (40 mm); 50 per pack
FPS-6Mass-Fiber Protection Sleeves, Glass Ceramic Strength Member, 1.57 in (40 mm); 25 per pack
FPS-61-2.6 Pre-Shrunk Single-Fiber Protection Sleeves, Stainless Steel Strength Member, 2.40 in (61 mm); 100 per pack 

Features

Features

  • Durable Aluminum Housing
  • Four LGX Cassette/Interconnect Panel Slots
  • Holds up to Four Splice Trays, each with 12-Single Fiber Splices or 144f (12-fibers x 12-splices) Mass Fusion Splices per Tray
  • Four Knockout Holes for Cable Entry (grommets included)
  • Lockable via Padlock (padlock not supplied)

Benefits

  • LGX Component Footprint
  • Interior is Easily Accessible for Installation and Managing Fibers and Connections
  • Compact and Efficient Size
  • Lockable Housing for Security

Related products