Freeform Ribbon™ All-Dielectric Monotube OSP Cable

Freeform Ribbon™ All-Dielectric Monotube OSP Cable

Sumitomo Electric Lightwave’s Freeform Ribbon™ All-Dielectric Monotube Outside Plant (OSP) Cable is intended for duct and direct buried installation, and features the patented 12-fiber pliable Freeform Ribbon™ constructed of 250 μm color-coded optical fibers.

Freeform Ribbon™ enables high fiber density within a small cable diameter which in turn helps with limited duct space. The 12-fiber ribbons may be spliced to a conventional ribbon, pliable ribbon, or non ribbonized (single) fibers, as well as connectorization with both MPO and all industry standard connectors. The non-preferential bend axis allows for easy installation in space-constrained areas.

Find a Distributor

Product Downloads

Product Information

Download

Specifications

General
ApplicationOutside Plant
Jacket ColorBlack
Cable StructureMonotube™
Ribbon TypeFreeform Ribbon™
Metallic ElementsNo Bonding/Grounding Required
Fiber
Fiber Type (96f to 864f Only)PureBand™-R G.657.A1 Bend Insensitive Single-Mode Fiber
(Mode Field Diameter at 1310 nm: Typ. 9.2 μm)
Fiber Type (1728f Only)PureAccess® G.657.A1Bend Insensitive Single-Mode Fiber
(Mode Field Diameter at 1310 nm: Typ. 8.6 μm)
Fiber Attenuation GradesStandard Single-Mode
Maximum Attenuation1310 nm | 0.40 dB/km
1550 nm | 0.30 dB/km
Bend Radius
During Installation (Dynamic)20 x Cable OD
After Installation (Static)15 x Cable OD
Mechanical Characteristics
Max. Tensile Load (During Installation)600 lb (2,670 N)
Max. Recommended Service Load180 lb (800 N)
Maximum Compression Resistance124 lb/in (220 N/cm)
Temperature Range
Operation-40°F to +158°F (-40°C to +70°C)
Storage & Shipping-40°F to +158°F (-40°C to +70°C)
Installation-22°F to +140°F (-30°C to +60°C)
Standards
StandardsReferencing Telcordia GR-20

Ordering Information

Part NumberFiber CountNominal Cable ODNominal WeightNo. of UnitFiber No. of Unit
INMMLB/KFTKG/KM
250μm
SE-CMDP0096-G-M96f0.4110.451.075.9––
SE-CMDP0144-G-M144f0.4310.955.883.0272
SE-CMDP0288-G-M288f0.4712.083.0123.4372
SE-CMDP0432-G-M432f0.5313.5100.8150.0672
SE-CMDP0864-G-M864f0.7218.2145.1216.01272
SE-8MDP1728-G-M1,728f0.98 24.9246.0366.02472

Accessories

Part NumberDescription
CRC-001 Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002Cable Slit Tool for End/Mid-Span Access
UCTS-001Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADEReplacement Blade for UCTS-001
FRSJ-01Freeform Ribbon™ Separation Tool Kit
MA-2-REFILLRibbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARSLynx-CustomFit™ Aramid Shears

Features

Features

  • Patented Pliable Freeform Ribbon™ Color-Coded Optical Fibers
  • SEL’s PureBand™-R G.657.A1 Bend Insensitive Single-Mode Fiber (96f to 864f Only)
  • SEL’s PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber (1728f Only)
  • Gel-Free Water Blocking Tape
  • Tested Per Applicable Requirements of Telcordia GR-20

Benefits

  • Color-Coded Optical Fibers for Quick and Easy Identification
  • Robust in Outdoor Environments
  • High Fiber Density Maximizes Duct Space
  • Pliable Ribbon Allows For Higher Density In Space-Constrained Applications
  • Compatible With Mass- & Single-Fiber Fusion Splicers, Splice-On Connectors, and Hardware

Related products