Multi-Mode Fiber 62.5/125 μm

These small fiber bundles are designed for installation into the FutureFLEX® Air-Blown Fiber® tube cable infrastructure. Operating wavelengths are 850 and 1300 nm. They can be used in indoor and outdoor installations.

Find a Distributor

Product Downloads

Product Information

Download

Specifications

PropertySpecification
Fiber Bundle Jacket MaterialPolyethylene Extruded Foam (PEF)
Fiber Bundle Jacket ColorBlue
Core Diameter62.5μm
Cladding Diameter125μm
Buffer / Acrylate Diameter250μm
Maximum Attenuation at 850 / 1300 nm< 3.5 / 1.5 dB/km
Fiber Bandwidth at 850 / 1300 nm220 / 600 MHz-km
Group Index of Refraction850 nm | 1.496
1300 nm | 1.491
Fiber Bundle Minimum Bend Radius1.5 in(38.1 mm)

Ordering Information

Part NumberFiber TypeDescriptionOutside Dia. (In. / Mm.)Max Wgt.Std. Lgth. (490 Bobbin)Max. Lgth. (600 Bobbin)
FB06M662.5/125 OM1Multi-Mode 6-Fiber0.08 in (2.0 mm)1.3 lb/kft14,000 ft40,000 ft
FB12M6S62.5/125 OM1Multi-Mode 12-Fiber0.08 in (2.0 mm)3.4 lb/kft7,000 ft39,000 ft
FB24M662.5/125 OM1Multi-Mode 24-Fiber0.12 in (3.0 mm)3.4 lb/kft7,000 ft15,700 ft
FB48M662.5/125 OM1Multi-Mode 48-Fiber0.15 in (3.7 mm)5.6 lb/kft6,500 ft10,900 ft

Resources

Sumitomo Product Specifications
SF-F04-021: Multimode 62.5μm Core Optical Fiber (OM1) Gigabit Grade Specification Sheet
Sumitomo Recommended Procedures
SP-F04-002: ABF Fiber Bundle Specification Sheet
SP-F04-006: Fiber Bundle Stripping Procedure
SP-F04-025: Fiber Bundle Removal Procedure
LFI Resource Portal
LFI Resource Portal | Sumitomo Electric Lightwave Corporation

How-To Videos

See All Videos
Splicing and Assembling MPO Connector on Sumitomo Electric’s Q102-M12 Ribbon Fiber Fusion Splicer
Assembling an ST Splice-On Connector with Sumitomo Electric’s Q102-CA+ Fusion Splicer on Cordage

Part of Sumitomo Electric Lightwave’s How -To video series. This guide provides a thorough introduction to Assembling an ST Splice-On Connector with Sumitomo Electric’s Q102-CA+ Fusion Splicer on Cordage
Splicing Ribbon Fiber on Sumitomo Electric’s Q102-M12 Ribbon Fiber Fusion Splicer
Splicing Fiber with Sumitomo Electric’s Q102-CA+ Fusion Splicer

Part of Sumitomo Electric Lightwave’s How -To video series. This guide provides a thorough introduction to Splicing with Sumitomo Electric’s Q102-CA+ Fusion Splicer

Features

  • Up to 48 Fibers Per Bundle
  • Industry Standard 62.5 μm Graded-Index Multimode Optical Fiber
  • Fibers Individually Color Coded Per TIA Standards
  • Blue Aerodynamic Jacket Allows Long Distance Blows
  • Ripcords for Easy Bundle Entry
  • UL Listed for Use with Fire-Fated Tube Cables
  • Meets ICEA, TIA and UL Standards
  • Meets IEEE 802.3z Gigabit Ethernet Standard

Related products