Freeform Ribbon™ Outdoor/Indoor Plenum Cable

Freeform Ribbon™ Flexible Indoor Riser Optical Fiber Cable

Sumitomo Electric Lightwave’s Freeform Ribbon™ Outdoor/Indoor Plenum Central Tube Cable is intended for outdoor and indoor plenum installations and features a flame-retardant outer jacket and the patented 12-fiber pliable Freeform Ribbon™ constructed of 250 μm color-coded optical fibers. The cable meets NFPA 262 and CSA FT6 specifications.

Freeform Ribbon™ enables high-fiber density within a small cable diameter which in turn helps with limited duct space. The 12-fiber ribbons may be spliced to a conventional ribbon, pliable ribbon, or non-ribbonized (single) fibers, as well as connectorization with both MPO and all industry standard connectors. The non-preferential bend axis allows for easy installation in space-constrained areas.

Find a Distributor

Product Downloads

Product Information

Download

Specifications

GENERAL
ApplicationOutdoor/Indoor
Jacket ColorYellow
Cable StructureCentral Tube
Ribbon TypeFreeform Ribbon™
Metallic ElementsBonding/Grounding Required
FIBER
Fiber TypePureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation GradesStandard Single-Mode
Attenuation – 1310 nm0.40 dB/km
Attenuation – 1550 nm0.30 dB/km
BEND RADIUS
During Installation20 x Cable OD
After Installation10 x Cable OD
MECHANICAL CHARACTERISTICS
Max. Tensile Load During Installation600 lb (2,670 N)
Max. Recommended Service Load200 lb (890 N)
Compression Resistance124 lb/in (220 N/cm)
TEMPERATURE RANGE
Operation-40 to +158°F (-40 to +70°C)
Store & Shipping-40 to +158°F (-40 to +70°C)
Installation-14 to +140°F (-10 to +60°C)
STANDARDS
StandardsOFNP, FT6/NFPA 262, ICEA 596

Ordering Information

PART NUMBERFIBER SIZEFIBER COUNTNOMINAL CABLE OD IN (MM)NOMINAL WEIGHT
LB/KFT (KG/KM)		FIBERS PER
BUNDLE		NO. OF
BUNDLES
SE-8RYP0144-B250 μm144f0.56 in (14.3 mm)141.0 lb/kft (210.1 kg/km)72f2

Accessories

PART NUMBERDESCRIPTION
CRC-001Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002Cable Slit Tool for End/Mid-Span Access
UCTS-001Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADEReplacement Blade for UCTS-001
FRSJ-01Freeform Ribbon™ Separation Tool Kit
MA-2-REFILLRibbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARSLynx-CustomFit™ Aramid Shears

Resources

Fiber Optic Ribbon Termination Resources
SRP (SP-F02-043) Pliable Ribbon Plenum Cable Preparation
SRP (SP-F02-045) Freeform Ribbon™ Matrix Removal Procedure
Freeform Ribbon™ Marking Codes
UCTS-001 Instructions
Optical Fiber Specifications
Sumitomo PureAccess® Single-Mode Fiber Specification

Features

  • Patented Pliable Freeform Ribbon™ Color-Coded Optical Fibers
  • Sumitomo Electric PureAccess® Bend Insensitive Single Mode Fiber G.657.A1
  • Gel-Free, Water-Blocking Tape & Yarn
  • Flame-Retardant Outer Jacket
  • Dry Central Tube for Easy Installation; No Mess When Splicing
  • RoHS Compliant

Benefits

  • Quick And Easy Fiber Identification
  • Color-Coded Optical Fibers for Quick and Easy Identification
  • Robust in Indoor and Outdoor Plenum Environments
  • High Fiber Density Maximizes Duct Space
  • Compatible With Mass and Single Fiber Fusion Splicers, Splice-On Connectors & Hardware

Related products