Freeform Ribbon™ Outdoor/Indoor LSZH Riser Monotube Cables
Sumitomo Electric Lightwave’s Freeform Ribbon™ Outside/Inside Low Smoke Zero Halogen (LSZH) Riser Monotube Cables are intended for duct and direct buried installation and features the patented 12-fiber pliable Freeform Ribbon™ constructed of 250 μm color-coded optical fibers.
Freeform Ribbon™ enables high fiber density within a small cable diameter which minimizes duct space requirements. The 12-fiber ribbons may be spliced to a conventional ribbon, pliable ribbon, or non-ribbonized (single) fibers, as well as connectorization with both MPO and all industry standard connectors. The non-preferential bend axis allows for easy installation in space-constrained areas.
Product Downloads
Specifications
| General | |
|---|---|
| Application | Outdoor/Indoor |
| Jacket Color | Black |
| Cable Structure | Monotube™ |
| Ribbon Type | Freeform Ribbon™ |
| Metallic Elements | No Bonding/Grounding Required |
| Fiber | |
|---|---|
| Fiber Type | PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber |
| Fiber Attenuation Grades | Standard Single-Mode |
| Maximum Attenuation | 1310 nm | 0.40 dB/km 1550 nm | 0.30 dB/km |
| Mode Field Diameter | 1310 nm | 8.6 μm ± 0.4 μm |
| Mechanical Characteristics | |
|---|---|
| Max. Tensile Load (During Installation) | 600 lb (2,670 N) |
| Max. Recommended Service Load | 180 lb (800 N) |
| Maximum Compression Resistance | 124 lb/in (220 N/cm) |
| Bend Radius | |
|---|---|
| During Installation (Dynamic) | 40 x Cable OD |
| After Installation (Static) | 30 x Cable OD |
| Temperature Range | |
|---|---|
| Operation | -40 to +158°F (-40 to +70°C) |
| Storage & Shipping | -40 to +158°F (-40 to +70°C) |
| Installation | +14 to +140°F (-10 to +60°C) |
| Standards & Compliance | |
|---|---|
| Standards | OFNR, UL 1666, 1685-LS, ICEA 696 |
| Regulatory Compliance | RoHS, REACH, Conflict Minerals, Proposition 65 |
Ordering Information
| Part Number | Fiber Count | Nominal Cable OD | Nominal Weight | Fibers Per Ribbon | Fibers Per Bundle | CPR Rating | ||
|---|---|---|---|---|---|---|---|---|
| IN | MM | LB/KFT | KG/KM | |||||
| 250μm | ||||||||
| SE-8MMP0288-B | 288f | 0.57 | 14.5 | 146.0 | 218.0 | 12f | Cca, s1a, d2, a1 | |
Accessories
| Part Number | Description |
|---|---|
| CRC-001 | Cable Ring Tool for End/Mid-Span Access; 0.25 – 1.625 in (4 – 28 mm) |
| CSC-002 | Cable Slit Tool for End/Mid-Span Access |
| FRSJ-01 | Freeform Ribbon™ Separation Tool Kit |
| JR-7 | Heated Jacket Remover with AC-Adapter & Battery for Single Fibers & up to 12-Fiber Ribbons |
| JR-M03 | Jacket Remover for 250μm, 900μm, and up to 3mm Jacketed Single Fibers |
| LYNX-SHEARS | Lynx-CustomFit™ Aramid Shears |
Features
Features
- Patented Pliable Freeform Ribbon™ Color-Coded Optical Fibers
- PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
- Robust in Outdoor/Indoor Riser Environments
- Gel-Free, Water-Blocking Tape
- Meets the Riser Cable Requirements of ICEA 696
- Tested Per Applicable Requirements of Telcordia GR-20
Benefits
- Color-Coded Optical Fibers for Quick and Easy Identification
- Pliable Ribbon Allows for Higher Density in Space-Constrained Applications
- Compatible with Mass- & Single-Fiber Fusion Splicers, Splice-On Connectors, and Hardware
Related products
-
Optical Fiber Cable Solutions
Standard Ribbon Indoor Plenum Central Tube Cables
View Product -
Optical Fiber Cable Solutions
Standard Ribbon Interlocking Armored Indoor Riser Central Tube Cables
View Product -
Optical Fiber Cable Solutions
Freeform Ribbon™ Interlocking Armored Indoor Riser Central Tube Cables
View Product -
Optical Fiber Cable Solutions
Cable Sheath Stripper
View Product