Freeform Ribbon™ OSP All-Dielectric Microduct Cables

Freeform Ribbon™ OSP All-Dielectric Microduct Cables

Sumitomo Electric Lightwave’s Freeform Ribbon™ OSP All-Dielectric Microduct Cables provide immediate scalability with installations of exact fiber types and counts required in real time. This cable features an all-dielectric design requiring no grounding or bonding, and the patented 12-fiber pliable Freeform Ribbon™ constructed of 250μm & 200μm color-coded optical fibers. Conduct fast and easy installs, upgrades, and MACs in minutes or hours versus the weeks or months associated with traditional cabling.

Freeform Ribbon™ enables high fiber density within a small cable diameter, which in turn helps with limited duct space. The 12-fiber ribbons may be spliced to a conventional ribbon, pliable ribbon, or non-ribbonized (single) fibers, as well as connectorization with both MPO and all industry-standard connectors. The non-preferential bend axis allows for easy installation in space-constrained areas.

Find a Distributor

Product Downloads

Product Information

Download

Specifications

General
ApplicationOutdoor
Jacket ColorBlack
Cable StructureMicroduct
Ribbon TypeFreeform Ribbon™
Metallic ElementsNo Bonding/Grounding Required
Fiber
Fiber Type (24f to 96f Only)PureAccess® G.657.A2 Bend Insensitive Single-Mode Fiber
Fiber Type (144f to 864f Only)PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation GradesStandard Single-Mode
Maximum Attenuation1310 nm  |  0.40 dB/km
1550 nm |  0.30 dB/km
Mode Field Diameter1310 nm  |  8.6 ± 0.4 μm
Mechanical Characteristics
Maximum Tensile Load (During Installation)300 lb (1,334 N)
Maximum Recommended Service Load90 lb (400 N)
Maximum Compression Resistance28 lb/in (50 N/cm)
Expected Blow Distance6,562 ft (2,000 m)
Bend Radius
During Installation (Dynamic)20 x Cable OD
After Installation (Static)15 x Cable OD
Temperature Range
Operation-30 to +158°F (-30 to +70°C)
Standards & Compliance
StandardsReferencing Telcordia GR-20; IEC60794
Regulatory ComplianceRoHS, REACH, Conflict Minerals, Proposition 65

Ordering Information

PART NUMBERFIBER COUNTNOMINAL CABLE ODNOMINAL WEIGHTFIBERS PER RIBBON
INMMLB/KFTKG/KM
250 μm
SE-ACDP0024-B-1224f0.307.623.535.012f
SE-ACDP0096-B-1296f0.307.623.535.012f
SE-8CDP0144-B-12-M144f0.328.226.940.012f
SE-8CDP0192-B-12-M192f0.348.730.946.012f
SE-8CDP0288-B-M288f0.4110.547.070.012f
SE-8CDP0432-B-M432f0.4712.060.490.012f
SE-8CDP0864-B-M864f0.5914.994.1140.012f
200 μm
DRMD-OSGN-SA00288-200-ADE288f0.379.534.952.012f
DRMD-OSGN-SA00432-200-ADE432f0.379.542.363.012f
DRMD-OSGN-SA00864-200-ADE864f0.5313.580.5120.012f
Microducts are sold separately.

Accessories

PART NUMBERDESCRIPTION
CRC-001Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002Cable Slit Tool for End/Mid-Span Access
UCTS-001Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADEReplacement Blade for UCTS-001
FRSJ-01Freeform Ribbon™ Separation Tool Kit
MA-2-REFILLRibbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers

Features

  • Patented Pliable Freeform Ribbon™ Color-Coded Optical Fibers
  • SEL’s PureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber (144f to 864f Only)
  • SEL’s PureAccess® G.657.A2 Bend Insensitive Single-Mode Fiber (24f to 96f Only)
  • Gel-Free, Water-Blocking Tape
  • Suitable to Blowing Installation in Microducts
  • All-Dielectric Design Requires No Grounding or Bonding

Benefits

  • Color-Coded Optical Fibers for Quick and Easy Identification
  • High Fiber Density Maximizes Duct Space
  • Pliable Ribbon Allows for Higher Density in Space-Constrained Applications
  • Compatible With Mass- and Single-Fiber Fusion Splicers, Splice-On Connectors & Hardware

Related products