Freeform Ribbon™ Indoor LSZH Riser Central Tube Cables

Freeform Ribbon™ Indoor LSZH Riser Central Tube Cables
Freeform Ribbon™ Indoor LSZH Riser Central Tube Cables

Sumitomo Electric Lightwave’s Freeform Ribbon™ Indoor Low Smoke Zero Halogen (LSZH) Riser Central Tube Cables feature a flame-retardant outer jacket, and the patented 12-fiber pliable Freeform Ribbon™ constructed of 250 or 200 μm color-coded optical fibers. Freeform Ribbon™ enables high fiber density within a small cable diameter, which minimizes duct space requirements. The 12-fiber ribbons may be spliced to a conventional ribbon, pliable ribbon, or non-ribbonized (single) fibers, as well as connectorization with both MPO and all industry standard connectors. The non-preferential bend axis allows for easy installation in space-constrained areas. In addition, this cable is designed for areas that require Low Smoke and Zero Halogen such as Subways systems and Tunnels.

Find a Distributor

Product Downloads

Product Information

Download

Declaration of Performance

Specifications

GENERAL
ApplicationIndoor
Jacket ColorYellow
Cable StructureCentral Tube
Ribbon TypeFreeform Ribbon™
FIBER
Fiber TypePureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation GradesStandard Single-Mode
Maximum Attenuation1310 nm | 0.40 dB/km
1550 nm | 0.30 dB/km
BEND RADIUS
During Installation20 x Cable OD
After Installation10 x Cable OD
MECHANICAL CHARACTERISTICS
Maximum Tensile Load During Installation300 lb (1,340 N)
Maximum Recommended Service Load100 lb (450 N)
Compression Resistance125 lb/in (220 N/cm)
TEMPERATURE RANGE
Operation+32 to +158°F (0 to +70°C)
Storage & Shipping-40 to +158°F (-40 to +70°C)
Installation+32 to +140°F (0 to +60°C)
STANDARDS
StandardsOFNR, FT4, Low Smoke/ST-1

Ordering Information

PART NUMBERFIBER SIZEFIBER COUNTNOMINAL CABLE OD
(in | mm)		NOMINAL WEIGHT
(lb/kft | kg/km)		FIBERS PER RIBBONNO. OF BUNDLESCPR RATING
SE-8RZP0072-B-12250 μm72f0.46 in (11.8 mm)98.5 lb/kft (146.5 kg/km)12fN/AN/A
SE-8RNP0096-B-12250 μm96f0.46 in (11.8 mm)100.1 lb/kft (148.9 kg/km)12fN/ACca, s1a, d0, a1
SE-8RZP0144-B-12250 μm144f0.57 in (14.4 mm)129.1 lb/kft (192.1 kg/km)12fN/AN/A
SE-8RNP0192-B-12250 μm192f0.57 in (14.4 mm)132.3 lb/kft (196.9 kg/km)12fN/ACca, s1a, d0, a1
SE-8RZT864-B200 μm864f0.86 in (21.8 mm)268.4 lb/kft (399.4 kg/km)12f12N/A

Accessories

PART NUMBERDESCRIPTION
CRC-001Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002Cable Slit Tool for End/Mid-Span Access
UCTS-001Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
BTR-3Buffer Tube Slit & Ring Tool, 0.250 – 0.563 in (6.4 – 14.3 mm) for End/Mid-Span Access
UCTS-001-BLADEReplacement Blade for UCTS-001
FRSJ-01Freeform Ribbon™ Separation Tool Kit
MA-2-REFILLRibbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03Jacket Remover for 250 μm, 900 μm, and Up to 3 mm Jacketed Single Fibers
LYNX-SHEARSLynx-CustomFit™ Aramid Shears

Resources

Fiber Optic Ribbon Termination Resources
SRP SP-F02-035: Pliable Ribbon Indoor Riser Cable Preparation
SRP SP-F02-045: Freeform Ribbon™ Matrix Removal Procedure
Freeform Ribbon™ Marking Codes
UCTS-001 Instructions
Fiber Optic Ribbon Termination Resources
Sumitomo Electric PureAccess® Single-Mode Fiber Specification

Features

  • Patented Pliable Freeform Ribbon™ Color-Coded Optical Fibers
  • PureAccess® Bend Insensitive Single Mode Fiber G.657.A1
  • Gel-Free
  • Dry Central Tube for Easy Installation
  • Flame-Resistant and Zero Halogen Rated Riser

Benefits

  • Quick and Easy Fiber Identification
  • Robust in Indoor Environments
  • High-Fiber Density Maximizes Duct Space
  • Compatible with Mass- and Single-Fiber Fusion Splicers, Splice-On Connectors, & Hardware

Related products