Freeform Ribbon™ OSP All-Dielectric Microduct Cables

Sumitomo Electric Lightwave’s Freeform Ribbon™ OSP All-Dielectric Microduct Cables provide immediate scalability with installations of exact fiber types and counts required in real time. This cable features an all-dielectric design requiring no grounding or bonding, and the patented 12-fiber pliable Freeform Ribbon™ constructed of 250μm & 200μm color-coded optical fibers. Conduct fast and easy installs, upgrades, and MACs in minutes or hours versus the weeks or months associated with traditional cabling.

Freeform Ribbon™ enables high fiber density within a small cable diameter, which in turn helps with limited duct space. The 12-fiber ribbons may be spliced to a conventional ribbon, pliable ribbon, or non-ribbonized (single) fibers, as well as connectorization with both MPO and all industry-standard connectors. The non-preferential bend axis allows for easy installation in space-constrained areas.

Find a Distributor

Product Downloads

Product Information

Download

Specifications

General
EnvironmentOutdoor
ApplicationDuct
Jacket ColorBlack
Cable StructureMicroduct
Ribbon TypeFreeform Ribbon™
Metallic ElementsNo Bonding/Grounding Required
Fiber
Fiber TypePureAccess® G.657.A1 Bend Insensitive Single-Mode Fiber
Fiber Attenuation GradesStandard Single-Mode
Attenuation1310 nm0.40 dB/km
1550 nm0.30 dB/km
Mode Field Diameter 1310 nm8.6 ± 0.4 μm
Bend Radius
During Installation20 x Cable OD
After Installation15 x Cable OD
Mechanical Characteristics
Max. Tensile Load During Installation300 lb (1,334 N)
Max. Recommended Service Load90 lb (400 N)
Compression Resistance124 lb/in (220 N/cm)
Expected Blow Distance6,562 ft (2,000 m)
Temperature Range
Operation-30 to +158°F (-30 to +70°C)
Standards & Compliance
StandardsReferencing Telcordia GR-20; IEC60794
Regularity ComplianceRoHS, REACH, Conflict Minerals, Proposition 65

Ordering Information

PART NUMBERFIBER COUNTNOMINAL CABLE ODNOMINAL WEIGHTFIBERS PER RIBBON
250 μm
SE-8CDP0096-B-M96f0.30 in (8.6 mm)23.5 lb/kft (35.0 kg/km)12f
SE-8CDP0144-B-M144f0.32 in (8.2 mm)32.3 lb/kft (48.0 kg/km)12f
SE-8CDP0288-B-M288f0.41 in (10.5 mm)47.0 lb/kft (70.0 kg/km)12f
SE-8CDP0432-B-M432f0.49 in (12.5 mm)70.6 lb/kft (105.0 kg/km)12f
SE-8CDP0864-B-M864f0.59 in (14.9 mm)94.1 lb/kft (140.0 kg/km)12f
200 μm
DRMD-OSGN-SA00144-200-ADE144f0.28 in (7.2 mm)22.9 lb/kft (34.0 kg/km)12f
DRMD-OSGN-SA00192-200-ADE192f0.30 in (7.6 mm)26.9 lb/kft (40.0 kg/km)12f
DRMD-OSGN-SA00288-200-ADE288f0.36 in (9.2 mm)34.9 lb/kft (52.0 kg/km)12f
DRMD-OSGN-SA00432-200-ADE432f0.41 in (10.5 mm)47.0 lb/kft (70.0 kg/km)12f
DRMD-OSGN-SA00864-200-ADE864f0.53 in (13.5 mm)73.9 lb/kft (110.0 kg/km)12f

Accessories

PART NUMBERDESCRIPTION
CRC-001Cable Ring Tool, 0.25 – 1.625 in (4 – 28 mm) for End/Mid-Span Access
CSC-002Cable Slit Tool for End/Mid-Span Access
UCTS-001Central Tube Slit & Ring Tool, 0.19 – 0.73 in (4.75 – 18.5 mm) for End/Mid-Span Access
UCTS-001-BLADEReplacement Blade for UCTS-001
FRSJ-01Freeform Ribbon™ Separation Tool Kit
MA-2-REFILLRibbon Matrix Remover with Board & Double-Sided Tape (Qty. 25)
JR-7Heated Jacket Remover with AC Adapter & Battery for Single Fibers & Up to 12-Fiber Ribbons
JR-M03Jacket Remover for 250 μm, 900 μm, and up to 3 mm Jacketed Single Fibers
LYNX-SHEARSLynx-CustomFit™ Aramid Shears

Features

  • Patented Pliable Freeform Ribbon™ Color-Coded Optical Fibers
  • PureAccess® Bend Insensitive Single Mode Fiber G.657.A1
  • Gel-Free, Water-Blocking Tape
  • Suitable to Blowing Installation in Microducts
  • All-Dielectric Design Requires No Grounding or Bonding

Benefits

  • Color-Coded Optical Fibers for Quick and Easy Identification
  • High Fiber Density
  • Maximizes Duct Space
  • Compatible With Mass- and Single-Fiber Fusion Splicers, Splice-On Connectors & Hardware

Related products